SEARCH PRODUCTS

PRODUCT CATEGORIES

Carburetor, Side Valve 97 (9 Super 7)

$309.99$399.99

SKU: BPE4501C Categories: , Tags: , , , , ,

Carburetor, Side Valve 97 (9 Super 7)  These retain the original look without the original problems.

  •  All-new tooling for crisp, flawless castings
  • New aluminum base assembly allows for cooler fuel temps and better fuel efficiency as compared to the original cast iron design
  • Stainless steel screws and hardware
  • Accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts
  • Features original Stromberg 0.97" venturi diameter
  • Modern Nitrophyl float and Neoprene gaskets
  • Original troublesome needle and seat replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running
  • Will not stick or dribble like the old Viton-tipped needle and seat setups
  • Gross-style jet valve won't corrode in modern fuel, something the original needle and seat units can't do
  • Comes with a No. 65 power valve and 0.045" main jets, identical to the stock 97
  • Extended brass throttle shaft to simplify multi-carb linkage Special base plate with no idle circuits or choke linkage
  • Special butterflies and shafts installed
  • Works best with progressive linkage
  • Idle only off the center or main carburetor
  • No more plug foul
    1. Features .045" main metering jets and a number 65 power valve, which is the same as a stock 97 carb.
    2. Replacement jet access plug gasket use # 91011542, replacement needle & seat gasket use # 91011543.
    3. Includes base gasket.
    4. The 9 Super 7 ® will operate suitably with fuel pressures ranging from 1-1/2 psi to 4 psi, with a desired setting of 2-1/2 psi to 3 psi. Fuel pressure from 4 psi to 7 psi will cause the carburetor to run excessively rich and may cause flooding. Flooding or leaks caused by excessive fuel pressure do not indicate a faulty carburetor.
    5. There are no provisions for a vacuum advance line. Ford & Mercury engines 1949-1953 using stock distributors will need an alternative place to connect the vacuum line.  Our independent tests produced these flow numbers:  3" of Vacuum - 60 CFM, 10" of Vacuum - 110 CFM, 15" of Vacuum - 136 1/2 CFM & 28" of Vacuum - 184 CFM

Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Additional information

Weight 4.4375 lbs
Dimensions 8 × 7 × 65 in
Style

,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.