1937-48 Steering Arms, Dropped

1937-48 Steering Arms Dropped  Can be fit to 1937-47 Pickup.  These forged steel steering arms are popular on 1928-1934 Fords with 4" dropped axles and four-bar or hairpin radius rod suspensions.  Will attach to '37-'48 Ford spindles and accept 11/16" Ford "tapered" tie rod ends (both the top and bottom are tapered to allow tie rods to mount above or below arm as needed).  You can drill-through with a 5/8" bit to use spherical rod ends.  Use a 46" eye-to-eye tie rod link when used with a 48" wide axle with Ford spindles.  Chrome version available.

Notes

1. For use with spring-over front axles ONLY. Should NOT be used with spring-behind front axle assembly. Flat plate arms are required when using a spring-behind front axle.
2. Use a 46" eye-to-eye tie rod link when used with a 48" wide axle with Ford spindles.

Specs

• 1 3/4" or 3 3/4" drop (measured from center of threaded spindle mount holes to the bottom face of the arm, as positioned in the photo).
• 3 3/8" eye-to-eye centers on mount bolt holes.

Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.